U.S. Barricades Parking Gates are designed and manufactured in the United States to give you the most durable, reliable systems that will last for years under the most demanding conditions.

The BPG3000 Parking Gates are powered with slower operating, counter balanced arm for commercial and industrial traffic control and parking applications. All units are available in 1/2 horsepower with 115V or 230V supply voltage options with various arm lengths from 14ft to 18ft.

We offer many devices for Barrier Parking Gate activation including radio controls, microwave detection, digital keypads, coded cards, sensing loops, telephone entry systems and button control stations. We can customize any type of activation system to meet your needs.

Specifications:

   • 1/2hp Electirc Motor
   • 18ft Wood Gate Arm
   •Width: 15"
   •Height: 40 1/2"
   •Depth: 15 1/2"
   •Weight: 220 lbs.
   •Warranty 5 yr
   •  Integral APeX Controller
   •24 VDC permanent magnet motor
   •115 VAC supply converted to 24 VDC for motor and controls
   • On-board Controller three-button control station
   • Power on/off switch
   • All accessory connections 24 VDC
   • Easily adjustable cam-operated limit switches
   • Lockable and removable front cover for easy access
   • Built-in maximum run timer and auto close timer
   • Master/second with simple 3-wire connection
   • Dual V-belt
   • Heavy-duty right angle gear reducer
   • Heavy-duty harmonic link with oil impregnated bronze bushings
   • Gate arm clamp with breaker bar
   •Full system capable for access control and reversing devices
   •Weather resistant galvanized steel cabinet with powder coat finish

   • Dual batteries charged by 115 VAC or optional solar panels

ELECTRICAL:

    • 1/2 HP, 115 VAC, single-phase, thermally-protected open-frame, resilient-mounted PSC motor
    • Power on/off switch
    • Duplex receptacle (115 VAC units only)
    • Three-button control station included
    • Accessory connections are 24-volt AC or DC
    • Easily adjustable cam-operated limit switches
    • Motor has manually-resettable overload
    • Full system capable for access control and reversing devices

Control Circuit:

    •Solid state circuit board, 24 VDC
    •Inherent current sensing system
    • 15 LEDs for easy setup and troubleshooting
    •  Built-in maximum run timer and auto close timer
    •Master/Slave - simple three-wire connection

Gate Arm:  

    •18ft Wood arm, painted white with yellow and black warning tape.
    •Optional 14ft and 16ft arms available.

Options:

    •230V, single-phase operation
    •Stainless steel cabinet for installations in areas where high concentration of corrosive materials is present
    •Thermostatically-controlled strip heater
    •Arm light kit
    •Battery Backup
    •Stainless steel cabinet for installations in areas where high concentration corrosive material is present
    •Optional solar panels